Paieška
Paieškos kriterijai
Paieška:
Prekės, atitinkančios paieškos kriterijus
-
ATEX, IECExZone 1 and Zone 2 Zone 21 and Zone 22Red, Amber, Blue, Green, Yellow, ClearResistant to corrosion, UV rays, high and low temperaturesIP66/IP67Materials: Enclosure – Stainless steel 316L, Lens – Tempered borosilicate glassLED (steady, rotary, or flashing), XENON (various intensities) -
ATEX, IECExCertified for Zone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder)Enclosure – Glass-Reinforced Polyester (GRP)IP66/IP67Up to three tones selectable from 59 pre-recorded tones -
ATEX, IECExEnclosure – Glass-Reinforced Polyester (GRP)IP66/IP67Up to three tones selectable from 59 pre-recorded tonesCertified for Zone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder) -
ATEX, IECExZone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder)Housing – 316L stainless steel; Lens – Borosilicate glass 3.3316L stainless steel backplateLED, XENONIP66/IP67Can be triggered together or independently -
ATEX, IECEx, optional SIL2 IEC61508Zone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder)IP66/IP67Compatible with PLC, ESD, and DCS systemsHousing – 316L Stainless Steel with UV-resistant paint -
Ex-tech Signalling Sprogios aplinkos (ATEX / IECEx) rankinis iškvietimo taškas „Break Glass“ – CP135ATEX, IECExZone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder)Housing – Glass-Reinforced Polyester (GRP) with UV-resistant paintIP66/IP67Compatible with PLC, ESD, and DCS systems -
Ex-tech Signalling Sprogios aplinkos (ATEX / IECEx) rankinis iškvietimo taškas „Break Glass“ – CP150ATEX, IECEx, optional SIL2 IEC61508Zone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder)Housing – Glass-Reinforced Polyester (GRP) with UV-resistant paintIP66/IP67Compatible with PLC, ESD, and DCS systems -
ATEX, IECEx, optional SIL2 IEC61508Zone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder)Housing – 316L Stainless Steel for durability in harsh environmentsIP66/IP67Compatible with PLC, ESD, and DCS systemsAvailable in two versions – standard push button and push button with key reset -
ATEX, IECEx, optional SIL2 IEC61508Zone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder)Housing – Glass-Reinforced Polyester (GRP) with UV-resistant paintIP66/IP67Compatible with PLC, ESD, and DCS systemsAvailable in two versions – standard push button and push button with key reset -
ATEX, IECEx, optional SIL2 IEC61508Zone 1 & Zone 2 (Gas/Vapour) and Zone 21 & Zone 22 (Dust/Powder)Housing – Glass-Reinforced Polyester (GRP) with UV-resistant paintIP66/IP67Compatible with PLC, ESD, and DCS systemsAvailable in two versions – standard push button and push button with key reset -
Designed to be welded.Materials: Mild Steel, Stainless Steel and AluminiumTo be sealed with standard or EMC HRT/HRTO and HRST. -
Designed to be bolted or castedMaterials: Mild Steel, Stainless Steel and AluminiumTo be sealed with standard or EMC HRT/HRTO and HRST. -
Designed to be welded to a bulkhead or deck.Material: Mild Steel, Stainless Steel, Aluminium and other materials under request.To be sealed with standard or EMC HF blocks, compression systems and accessories. -
Designed to be welded to a bulkhead or deck.Materials: Mild Steel, Stainless Steel.To be sealed with standard or EMC HF blocks, compression systems and accessories -
Made of zero halogen, intumescent elastomeric polymer.No modification of the block needed during installation. Zero waste material.Four sealing grooves within the internal faces ensure correct contact all along the cable/pipe.Minimum and maximum sealing range is marked on the blocks. -
Designed to fill spaces within the frameMade from high-quality, durable materials for long-lasting performance.No special tools are required for installation.Certified for use in EX zones and hazardous environments. -
Available to seal services from 4mm up to 170mm of external diameterTolerant up to 7 mm.Designed to be installed using Hawke Sleeves (welded, bolted or casted).No extra tools are required for its installation. -
Designed to be installed using Hawke Sleeves (welded, bolted or casted) and standard HF blocksManufactured in intumescent elastomer polymer with stainless steel front and back plates. Plates also available in mild steel.No extra tools are required for its installation. -
Zones 1, 2, 21, and 22IP66288x583x65 mmEN 44300 aluminum alloy -
IP66 ProtectionSuitable for Zones 1, 2, 21, 22Durable Aluminum Housing -
Zones 1, 2, 21, and 22IP66EN 44300 aluminum alloyLumen outputs from 17350lm up to 33100lm -
IP66 ProtectionSuitable for Zones 1, 2, 21, 22Durable Aluminum HousingAvailable in both symmetrical 81° and asymmetrical 50° beam anglesLumen outputs from 17,365lm to 33,120lm -
Ex II 2 G Ex ib IIC T4 Gb-10°C to 40°C3 hours of operation1.2kg (with battery)LED -
II 2 G Ex d / Exe / Exia IIC GbII 2 D Ex tb IIIC Db1 1/2" NPTNickel plated brassFor armoured cable-60°C ÷ +180°C -
II 2 G Ex d / Exe / Exia IIC GbII 2 D Ex tb IIIC Db1 1/4" NPTNickel plated brassFor armoured cable-60°C ÷ +180°C
